IPhone
If you have an iPhone 3G or an original iPhone running the 2.0 software/firmware, please see the iPhone 3G article instead. Those instructions are specific to the new iPhone 3G and 2.0 software available for the first generation of iPhones.
Setting up your email on your iPhone
Here is information on how to setup an iPhone to access a mailbox hosted with TQCI.
- Go to 'settings'
- Select 'Mail'
- Click on Add Account...
- You'll then be taken to the screen to select the type of account you'll be setting up. Since TQCI, unfortunately, is not listed there you'll need to select 'Other', as seen below:
- From there, Fill in the fields as seen below:
Name: Your name, the name you want to display on the receiving end.
Address: Your email address. This is the address where replies will be sent to and should likely be the same as your username.
Description: Description of this account.
Incoming Mail Server
Host Name: mail.tqci.net
Username: your-email@tqci.net (the email address you're accessing)
Password: Password for the email address.
IMAP Ports: Use Port 993 for inbound and Port 587 for outbound/SMTP.
Outgoing Mail Server (SMTP)
Host Name: mail.tqci.net
Username: your-email@tqci.net
Password: Password for the email address.
At this point, click 'save' at the top and it should automatically detect the rest of your settings and connect to your mailbox. In the event that it doesn't work, you might want to check your accounts 'Advanced' settings and make sure they look like this:
That's it!
Troubleshooting
If you are having trouble and suspect you may have set something incorrectly please refer to this page- http://home.tqci.com/support/emailsetup.html
IMAP Ports: Use Port 993 for inbound and Port 587 for outbound/SMTP.
