Configuring Dial-Up Networking
These directions are for either configuring an existing dial-up networking connection, or creating a new one for TQCI.

IE 3.02

1. Double click "My Computer."
2. Double click "Dial-Up Networking."
If your creating a new connection:
3. Double click "Make a new connection"
4. This window will prompt you for a name for the connection. I would suggest "TQCI." Once you have entered this information, click next.
5. This window will ask for phone number information. Since we are required to dial 10 digits, we will enter "301" in the first box where it requests the area code, then enter "3018661613" in the telephone number block. We will disable dialing the area code first, and this will make it dial the full 10 digit number (including the area code) that we placed in the telephone number field. Once this is complete, click next.
6. Click Finish.
Editing the connection for TQCI
7. Now that your in dial-up networking, find the connection you just made, i.e. "TQCI" and click your RIGHT mouse button over top of it. Of course, if you already have an existing connection and would just like to edit it, choose whichever one is available. After clicking the RIGHT mouse button on the icon, it will show you a menu next to it. Choose "properties."
If right clicking on the icon does not work, click the icon once with your left mouse button, then choose "File" (from the top of the window), then choose "properties"
8. Now that your in properties, you will notice the phone number up top. There are 2 separate fields - 1 for area code, and 1 for phone number. Please make sure that the full 10 digit phone number (including the area code) is the the "Telephone Number" block.
9. Directly underneath is a check box that will allow the computer to dial the area code or not. Please make sure there is no checkmark in this box. If there is a checkmark, you can remove it by clicking on it.
EXAMPLE OF THIS SCREEN
10. You will need to locate the "server-types" button or tab by locating it either at the top of the window, or underneath the modem configuration. Please click on "server-types."
11. Once in server-types, please make sure under "Type of Dial-Up Server" has "PPP; Windows 95, etc." selected. If not, click on that window to show a menu, then choose this.
12. Under "Advanced Options" the only thing that need be checked is "Enable Software Compression."
13. Under "Allowed Network Protocols" the only thing that need be checked it "TCP/IP"
EXAMPLE OF THIS SCREEN
14. From here click on "TCP/IP settings"
15. The very top option should be checked, "Server assigned IP address"
16. In the next section, you will want to click on "Specify Name Server Addresses"
17. Once you have clicked this option, press your tab key. This should highlight the first zero next to "Primary DNS"
18. Type in this number for the primary DNS: 64.244.8.5
19. Now hit your TAB key.
20. Type in this number for the secondary DNS: 64.244.8.6
21. There is no information needed in the Primary WINS or Secondary WINS.
22. Ensure the bottom 2 boxes, "Use IP Header Compression" and "Use default gateway on remote network" ARE checked.
EXAMPLE OF THIS SCREEN
23. Click OK all the way back out to the "Dial-Up Networking" window, and close out dial-up networking, and "My computer"
If you have made a new dial-up networking connection -
24. You need to make sure your Internet explorer and Internet mail programs know that this new connection is what you will be using to connect to the Internet. If you have edited an existing connection, there is nothing else to be changed.
25. On your main desktop, you will see your Internet Explorer icon (globe with magnifying glass on it.) Please RIGHT click on this icon, and choose properties from the menu. If right clicking does not work, you will need to go to My Computer, Control Panel, and double-click on Internet. Either of these will take you to the same place.
26. Once in the Internet Explorer properties, please click on the top tab that reads "Connection."
27. Make sure the check-box is checked up top for "I connect to the Internet as needed using the following Dial-Up Networking Connection."
28. Make sure the connection listed below reads as the same as you just made i.e. "TQCI", or whatever other name was used.

 

More questions? Please email Tech Support